Schluter Edge Profiles for Floor Coverings

Schluter Stair Nosing Profiles
Schluter Stair Nosing Profiles
Schluter Stair Nosing Profiles Schluter is the world wide leader in Stair Nosing Profiles: The edges of stairs are exposed to heavy mechanical stresses and represent a high risk of injuries. Because of their slip resistant design and excellent visibility Schluter TREP profiles, which can also be retrofitted improve safety and protect the edges of stairs from damage to keep tile coverings intact. Schluter TREP and ideally suited for use in combination with Schluter LIPROTEC illuminated profile technology. The full range including prices, colours, sizes and thicknesses  available can be seen in the catalogue that you may download below but here is a brief overview.  Trep - E:  is a stainless steel movement nosing with a slip resistant surface Trep - G/ - GL is a stair nosing profile with brushed stainless steel with an adhered non slip thread Trep S/ - B  are slip resistant stair nosings. The profiles have an aluminium support section or a stainless steel support section with a replaceable thermoplastic thread. Trep - FL is an aluminium or stainless steel nosing in Florentine design for enhancing the safety and visual appeal of steps. It is designed for stairs with tile or natural stone coverings Trep - EK is a stainless steel stir nosing profile with a special non slip thread for enhancing the safety and visual appeal of stairs. It can be retrofitted to steps with tile or natural stone coverings Trep - EFK is a stainless steel stair profile with a special non slip tread to create safe and attractive step treads. It can be fixed using adhesive in the corresponding milled grooves or subsequently on stair steps, Trep - GK/ - GLK is a stair nosing profile with an adhered non slip tread. It can be retrofitted to steps with tile or natural stone coverings
Click here
Schluter Movement and Control Joint profiles
Schluter Movement and Control Joint profiles
Schluter Movement and Control Joint Profiles Schluter is the world wide leader in Edge Profiles for floors. The full range including prices, colours, sizes and thicknesses  available can be seen in the catalogue that you may download below but here is a brief overview. ( This contains only a small percentage of the overall number of product groupings involved in this range - All are contained in The Catalogue) Dilex EDP:  is a stainless steel movement profile  which allows horizontal movement through a tongue and groove connection Dilex KS is a movement profile with edge protection consisting of lateral anchoring legs made up of Aluminium or Stainless Steel which are connected to a replaceable movement zone made of soft rubber Dilex EKSB  is a movement profile with edge protection for floor coatings and other thin floor coverings. It consists of lateral stainless steel anchoring legs that are connected to a fixed elastic insert of soft synthetic material. Dilex BTO is a structural movement nd control joint made of aluminium for floor and wall transitions. The lateral joint connection of the sliding middle section of the profile is able to absorb 3 dimensional movement. Dilex KSA is a connection profile with edge protection. The profiles anchoring leg ,ade of aluminium or stainless steel are connected to a replaceable movement zone made of soft PVC. The profile is used for creating transitions between coverings and fixed structures such as window frames Dilex RF is a 2 part corner profile made of recycled rigid PVC and soft CPE for durable , flexible and maintenance free perimeter joints between walls and floors Dilex EHK is a stain;ess steel coved shaped profile for internal wall corners or for floor to wall transitions with high hygienic requirements Dilex EMP is a stainless steel movement profile for screeds. The tongue and groove connections accommodate horizontal movement  
Click here
Schluter Edge Profile For Floor Coverings
Schluter Edge Profile For Floor Coverings
Schluter Edge Profiles for Floor Coverings: Schluter is the world wide leader in Edge Profiles for floors. The full range including prices, colours, sizes and thicknesses  available can be seen in the catalogue that you may download below but here is a brief overview. Schiene:  A special Profile that finishes and protects the edges of tiles surfaces that can also be used with other material and applications. Schiene - ES a stainless steel finishing profile for ceramic tiles and natural stone covering. It features an integrated joint spacer that defines a joint chamber with the covering material Schiene Basic is a finishing profile for tile coverings with a right angled transition from the anchoring leg to the vertical leg and a right angle head design Schiene V is a finishing profile with a right angled transition from the anchoring leg to the finishing leg for wooden floors or other rigid floors such as Terrazzo. The evenly shaped finishing leg allows for grinding of the covering. Reno TK provides a smooth transition between tiles surfaces and lower neighbouring floor coverings. In addition the edges of the adjacent floor coverings are effectively protected by the transition leg. Reno V is a pofile with a variable transition leg for smoothly joining floor coverings of different heights. The integrated spacer creates a uniform grout joint. Reno U is a profile for the stepless transition between floor coverings of different heights. The integrated spacer creates a uniform grout joint. Reno Ramp is a profile that provides a gradient transition between tile coverings and lower adjoining surfaces in extra heavy duty applications. The integrated spacer creates a uniform grout joint, Reno T is retrofitted to adjoin different types of floor covering of the same height
Click here
Copyright © 2024. Italian Tile and Stone, All rights reserved
This website uses cookies, and also collects some information using Google Analytics. Please review our legal agreements: Privacy Policy, Terms of Use, and Disclaimer.