- Description
- What is it?
- Where can I use it?
- Colors
- Sizes
- Finishes
- Lead Time
- Use with U/Floor Heating?
- PTV
Schluter Wall Profiles and Edge profiles
Starting from
Schluter Wall Corners and Edge Profiles
Schluter is the world wide leader in edge profiles that create highly durable and decorative finishing edges of wall coverings and skirtings made of tiles and natural stones. Due to the numerous materials and colour options available there are not limits to creativity in design with these profiles.The full range including prices, colours, sizes and thicknesses available can be seen in the catalogue that you may download below but here is a brief overview of a small percentage of the product groupings available.
Quadec - MC
is a chrome plated brass finishing profile that offers excellent edge protection for external corners of tiles walls. The visible area of the profile forms a right angled external corner for tile coverings
Quadec - E
is a stainless steel connection profile that offers excellent edge protection for external corners of tiles walls. The visible area of the profile forms a right angled external corner for tile coverings
Quadec - A
is a high quality anodised aluminium finishing profile for external corners of tiled walls. The visible area of the profile forms a right angled external corner for tile coverings. The integrated joint spacer defines a joint chamber with the tile.
Quadec - TS
is a high quality finishing profile made of aluminium with a specially textured coating for external wall corners and the edges of tile coverings. The exposed area of the profile forms the right angled outside corner of the tile covering. The joint spacer defines a joint chamber with the tile.
Rondec - MC
are symmetrically rounded profiles for external wall corners or edges of surface coverings made of brass with a chrome plated finish
Rondec - A
are symmetrically rounded profiles with an integrated joint spacer for external wall corners or edges of surface coverings made of aluminium with different anodised finishes. The integrated spacer creates a channel for grouting the tile.
Rondec - Pro
is a symmetrically rounded to protect and decorate tiled external wall corners and other tiles edges eg. tiled skirting. The integrated spacer creates a channel for grouting the tile.
Jolly
are decorative metal profiles that finish and protect external wall corners and other tiles edges eg tiles skirting. The integrated spacer creates a channel for grouting the tile
Deco
is a profile with a 6mm wide visible surface for decorative joint design in coverings. They can also be used as finishing profiles for external wall corners. Available in Alumnium Brass and stainless steel.
Diadec
is a high quality finishing profile of anodised aluminium for external wall corners and the edges of tile coverings. The exposed area of the profile forms a 45 degree beveled edge at the external corner. The joint spacer a uniform grout joint with the tile. The profile is available with or without anchoring legs
Schluter Wall Profiles and Edge profiles
Starting from
Schluter Wall Corners and Edge Profiles
Schluter is the world wide leader in edge profiles that create highly durable and decorative finishing edges of wall coverings and skirtings made of tiles and natural stones. Due to the numerous materials and colour options available there are not limits to creativity in design with these profiles.The full range including prices, colours, sizes and thicknesses available can be seen in the catalogue that you may download below but here is a brief overview of a small percentage of the product groupings available.
Quadec - MC
is a chrome plated brass finishing profile that offers excellent edge protection for external corners of tiles walls. The visible area of the profile forms a right angled external corner for tile coverings
Quadec - E
is a stainless steel connection profile that offers excellent edge protection for external corners of tiles walls. The visible area of the profile forms a right angled external corner for tile coverings
Quadec - A
is a high quality anodised aluminium finishing profile for external corners of tiled walls. The visible area of the profile forms a right angled external corner for tile coverings. The integrated joint spacer defines a joint chamber with the tile.
Quadec - TS
is a high quality finishing profile made of aluminium with a specially textured coating for external wall corners and the edges of tile coverings. The exposed area of the profile forms the right angled outside corner of the tile covering. The joint spacer defines a joint chamber with the tile.
Rondec - MC
are symmetrically rounded profiles for external wall corners or edges of surface coverings made of brass with a chrome plated finish
Rondec - A
are symmetrically rounded profiles with an integrated joint spacer for external wall corners or edges of surface coverings made of aluminium with different anodised finishes. The integrated spacer creates a channel for grouting the tile.
Rondec - Pro
is a symmetrically rounded to protect and decorate tiled external wall corners and other tiles edges eg. tiled skirting. The integrated spacer creates a channel for grouting the tile.
Jolly
are decorative metal profiles that finish and protect external wall corners and other tiles edges eg tiles skirting. The integrated spacer creates a channel for grouting the tile
Deco
is a profile with a 6mm wide visible surface for decorative joint design in coverings. They can also be used as finishing profiles for external wall corners. Available in Alumnium Brass and stainless steel.
Diadec
is a high quality finishing profile of anodised aluminium for external wall corners and the edges of tile coverings. The exposed area of the profile forms a 45 degree beveled edge at the external corner. The joint spacer a uniform grout joint with the tile. The profile is available with or without anchoring legs
Related products
-
Schluter Movement and Control Joint profilesSchluter Movement and Control Joint Profiles Schluter is the world wide leader in Edge Profiles for floors. The full range including prices, colours, sizes and thicknesses available can be seen in the catalogue that you may download below but here is a brief overview. ( This contains only a small percentage of the overall number of product groupings involved in this range - All are contained in The Catalogue) Dilex EDP: is a stainless steel movement profile which allows horizontal movement through a tongue and groove connection Dilex KS is a movement profile with edge protection consisting of lateral anchoring legs made up of Aluminium or Stainless Steel which are connected to a replaceable movement zone made of soft rubber Dilex EKSB is a movement profile with edge protection for floor coatings and other thin floor coverings. It consists of lateral stainless steel anchoring legs that are connected to a fixed elastic insert of soft synthetic material. Dilex BTO is a structural movement nd control joint made of aluminium for floor and wall transitions. The lateral joint connection of the sliding middle section of the profile is able to absorb 3 dimensional movement. Dilex KSA is a connection profile with edge protection. The profiles anchoring leg ,ade of aluminium or stainless steel are connected to a replaceable movement zone made of soft PVC. The profile is used for creating transitions between coverings and fixed structures such as window frames Dilex RF is a 2 part corner profile made of recycled rigid PVC and soft CPE for durable , flexible and maintenance free perimeter joints between walls and floors Dilex EHK is a stain;ess steel coved shaped profile for internal wall corners or for floor to wall transitions with high hygienic requirements Dilex EMP is a stainless steel movement profile for screeds. The tongue and groove connections accommodate horizontal movementClick here
-
Schluter Ditra heatNow available with NEW Schlüter-DITRA-HEAT-TB matting – up to 70% faster heat-up time. The complete patented system for under tile and stone heating for wall and floors, Schlüter®-DITRA-HEAT, has been updated to now include integrated thermal break, Schlüter-DITRA-HEAT-TB matting, which provides a thermal break, saving energy and makes installation easier, while providing faster-response time. Schlüter-DITRA-HEAT was designed so that the cables fit directly in the uncoupling mat that eradicates sticky situations, measuring mistakes, and the need for self-levelling and primers, ultimately saving time and money. The new Schlüter-DITRA-HEAT-TB mat uses the same system but also has a thermal break. This unique combination of fleece and matting allows an input of 136W/m2, to push up to 110W/m2 to the surface, therefore, the system costs less to run whilst producing significantly more heat per metre compared to other systems. Leaving other conventional systems out in the cold, Schlüter-DITRA-HEAT is the perfect all-in-one integrated solution for use under tiles and natural stone. Ideal for refurbishment and renovation projects thanks to its uncoupling and crack-bridging properties, Schlüter-DITRA-HEAT is unlike anything else available due to its loose heating cables which are fixed within the uncoupling mats unique studded design, therefore free of tape or glue. Offering optimum freedom for creating concentrated heating zones, as well as providing uniform spacing without the need for measuring and marking, the new system will dramatically cut installation time by up to 70%. Time-saving benefits include: • Easy press to lay cable – no tape or glue • No self-levelling layer or primer laying – time saved on application • CE Marked waterproofing simply by sealing the matting joints and connections • Loose heating cable – greater flexibility • Uniform spacing – no measurements • No need for insulation boards with Schlüter-DITRA-HEAT-TB matting • Integrated and balanced packages – all from one trusted manufacturer • Can be tiled immediately – no waiting time Schlüter-DITRA-HEAT makes the installation of under tile heating simpler and easier than ever before. Its low assembly height is also ideally suited for renovation projects and it’s even suitable for installation over problematic substrates. Ditra Heat and All Schluter Products are available from our Two Dublin Showrooms - Send an Enquiry or Call Us Today for Further detailsClick here
- Sizes
- 9
-
Schluter Stair Nosing ProfilesSchluter Stair Nosing Profiles Schluter is the world wide leader in Stair Nosing Profiles: The edges of stairs are exposed to heavy mechanical stresses and represent a high risk of injuries. Because of their slip resistant design and excellent visibility Schluter TREP profiles, which can also be retrofitted improve safety and protect the edges of stairs from damage to keep tile coverings intact. Schluter TREP and ideally suited for use in combination with Schluter LIPROTEC illuminated profile technology. The full range including prices, colours, sizes and thicknesses available can be seen in the catalogue that you may download below but here is a brief overview. Trep - E: is a stainless steel movement nosing with a slip resistant surface Trep - G/ - GL is a stair nosing profile with brushed stainless steel with an adhered non slip thread Trep S/ - B are slip resistant stair nosings. The profiles have an aluminium support section or a stainless steel support section with a replaceable thermoplastic thread. Trep - FL is an aluminium or stainless steel nosing in Florentine design for enhancing the safety and visual appeal of steps. It is designed for stairs with tile or natural stone coverings Trep - EK is a stainless steel stir nosing profile with a special non slip thread for enhancing the safety and visual appeal of stairs. It can be retrofitted to steps with tile or natural stone coverings Trep - EFK is a stainless steel stair profile with a special non slip tread to create safe and attractive step treads. It can be fixed using adhesive in the corresponding milled grooves or subsequently on stair steps, Trep - GK/ - GLK is a stair nosing profile with an adhered non slip tread. It can be retrofitted to steps with tile or natural stone coveringsClick here
-
Schluter Edge Profile For Floor CoveringsSchluter Edge Profiles for Floor Coverings: Schluter is the world wide leader in Edge Profiles for floors. The full range including prices, colours, sizes and thicknesses available can be seen in the catalogue that you may download below but here is a brief overview. Schiene: A special Profile that finishes and protects the edges of tiles surfaces that can also be used with other material and applications. Schiene - ES a stainless steel finishing profile for ceramic tiles and natural stone covering. It features an integrated joint spacer that defines a joint chamber with the covering material Schiene Basic is a finishing profile for tile coverings with a right angled transition from the anchoring leg to the vertical leg and a right angle head design Schiene V is a finishing profile with a right angled transition from the anchoring leg to the finishing leg for wooden floors or other rigid floors such as Terrazzo. The evenly shaped finishing leg allows for grinding of the covering. Reno TK provides a smooth transition between tiles surfaces and lower neighbouring floor coverings. In addition the edges of the adjacent floor coverings are effectively protected by the transition leg. Reno V is a pofile with a variable transition leg for smoothly joining floor coverings of different heights. The integrated spacer creates a uniform grout joint. Reno U is a profile for the stepless transition between floor coverings of different heights. The integrated spacer creates a uniform grout joint. Reno Ramp is a profile that provides a gradient transition between tile coverings and lower adjoining surfaces in extra heavy duty applications. The integrated spacer creates a uniform grout joint, Reno T is retrofitted to adjoin different types of floor covering of the same heightClick here



