Schluter Systems Products

Schluter Kerdi Board - The Universal Substrate for Tiles Schluter Kerdi Board is the perfect covering. No Matter whether you work with mosaics or large format tiles, an absolutely level with straight and precise angled internal and external corners is essential for a perfect tile covering.... which tile installers can now easily create using Schluter Kerdi Board. This who assume responsibility and warranty for the tile covering also have to be responsible for the substrate. Developers contractors and architects should bear this in mind when contracting the work. For this purpose Schluter Kerdi Board offers the following properties Even, impact resistant and rigid Waterproof and Temperature resistant Reliable bonded waterproof Vapour Resistant Thermally Insulating Fleece webbing for easy anchoring in thin bed adhesive Quick and easy to Install Lightweight easy to handle and transport Contains no cement or fibreglass Dust free and easy to cut ( With a Stanley Knife) Printed grid lines for Precise cutting Suitable for use on any kind of backround or substrate Suitable for free standing partition walls/shelves, coverings and similar structures

Schluter Kerdi Drain - Centre Drainage Schluter Kerdi Drain is the original floor drainage system for cetre point drainage. It provides secure connection for bonded waterproof connections in various grate and frame combinations and includes the complementary ranges Kerdi Collar and Kerdi Shower providing a fully integrated system for greater peace of mind. Download the Catalogue below to see the full range of colours, sizes and finishes or call or visit one of our Dublin Showrooms today!  

Schluter Kerdi Line - Elegant Drainage Schluter Kerdi Line linear drains bring elegance and functionality to walk in showers. Schluter Kerdi Line is a complete system that includes all components for floor level shower areas. My Schluter Kerdi Line adds a personal touch : Customers can choose to add an individual engraving to the grate and/or frame of the drainage channel. The range also extents to Kerdi Shower which offers a wide choice of preformed 2% sloped shower trays made specifically for use with the drains. Download the catalogue for full details but below is a brief overview of the features Up To 14 Channel lengths ( from 50cm - 180cm) Low assembly heights Complete Sets with Waterproofing collar Four Different Channel covers Stainless Steel Grates and Frames individually customisable Fully adjustable to tile thicknesses Extensive assortment of grate covers Download the Catalogue below to see the full range of colours, sizes and finishes or Call one of our our Dublin Showrooms Today   

Schluter Kerdi Schluter Kerdi is a waterproofing membrane that is integrated into the tiled assembly. Thanks to convenient imprinted gridlines the product is particularly easy to install.It is suitable for waterproofing in conjunction with tiled surfaces on walls and floors. The high water vapour diffusion resistance of Schluter Kerdi DS makes it suitable as a vapour barrier in bonded floor assembled with tile coverings. Schluter Kerdi is part of a complete product system with sealing bands, corners and pipe collars. A proven solution all over the world for more than 25 years. The sealing adhesive Schluter Kerdi-Coll for joints and connections completes the waterproofing system from a single source fo peace of mind. While the floor drain systems Schluter Kerdi Drain ( Centre Drain) and Schluter Kerdi Line ( Linear Drain) provide correct drainage, the modular Schluter Kerdi Shower System is designed for the installation of floor level showers  

Schluter Wall Corners and Edge Profiles Schluter is the world wide leader in edge  profiles that create highly durable and decorative finishing edges of wall coverings and skirtings made of tiles and natural stones. Due to the numerous materials and colour options available there are not limits to creativity in design with these profiles.The full range including prices, colours, sizes and thicknesses  available can be seen in the catalogue that you may download below but here is a brief overview of a small percentage of the product groupings available. Quadec - MC  is a chrome plated brass finishing profile that offers excellent edge protection for external corners of tiles walls. The visible area of the profile forms a right angled external corner for tile coverings Quadec - E is a stainless steel connection profile that offers excellent edge protection for external corners of tiles walls. The visible area of the profile forms a right angled external corner for tile coverings Quadec - A  is a high quality anodised aluminium finishing profile for external corners of tiled walls. The visible area of the profile forms a right angled external corner for tile coverings. The integrated joint spacer defines a joint chamber with the tile. Quadec - TS is a high quality finishing profile made of aluminium with a specially textured coating for external wall corners and the edges of tile coverings. The exposed area of the profile forms the right angled outside corner of the tile covering. The joint spacer defines a joint chamber with the tile.   Rondec - MC are symmetrically rounded profiles for external wall corners or edges of surface coverings made of brass with a chrome plated finish Rondec - A are symmetrically rounded profiles with an integrated joint spacer for external wall corners or edges of surface coverings made of aluminium with different anodised finishes. The integrated spacer creates a channel for grouting the tile.   Rondec - Pro is a symmetrically rounded to protect and decorate tiled external wall corners and other tiles edges eg. tiled skirting. The integrated spacer creates a channel for grouting the tile. Jolly are decorative metal profiles that finish and protect external wall corners and other tiles edges eg tiles skirting. The integrated spacer creates a channel for grouting the tile Deco is a profile with a 6mm wide visible surface for decorative joint design in coverings. They can also be used as finishing profiles for external wall corners. Available in  Alumnium Brass and stainless steel. Diadec is a high quality finishing profile of anodised aluminium for external wall corners and the edges of tile coverings. The exposed area of the profile forms a 45 degree beveled edge at the external corner. The joint spacer a uniform grout joint with the tile. The profile is available with or without anchoring legs

Schluter Stair Nosing Profiles Schluter is the world wide leader in Stair Nosing Profiles: The edges of stairs are exposed to heavy mechanical stresses and represent a high risk of injuries. Because of their slip resistant design and excellent visibility Schluter TREP profiles, which can also be retrofitted improve safety and protect the edges of stairs from damage to keep tile coverings intact. Schluter TREP and ideally suited for use in combination with Schluter LIPROTEC illuminated profile technology. The full range including prices, colours, sizes and thicknesses  available can be seen in the catalogue that you may download below but here is a brief overview.  Trep - E:  is a stainless steel movement nosing with a slip resistant surface Trep - G/ - GL is a stair nosing profile with brushed stainless steel with an adhered non slip thread Trep S/ - B  are slip resistant stair nosings. The profiles have an aluminium support section or a stainless steel support section with a replaceable thermoplastic thread. Trep - FL is an aluminium or stainless steel nosing in Florentine design for enhancing the safety and visual appeal of steps. It is designed for stairs with tile or natural stone coverings Trep - EK is a stainless steel stir nosing profile with a special non slip thread for enhancing the safety and visual appeal of stairs. It can be retrofitted to steps with tile or natural stone coverings Trep - EFK is a stainless steel stair profile with a special non slip tread to create safe and attractive step treads. It can be fixed using adhesive in the corresponding milled grooves or subsequently on stair steps, Trep - GK/ - GLK is a stair nosing profile with an adhered non slip tread. It can be retrofitted to steps with tile or natural stone coverings

Schluter Movement and Control Joint Profiles Schluter is the world wide leader in Edge Profiles for floors. The full range including prices, colours, sizes and thicknesses  available can be seen in the catalogue that you may download below but here is a brief overview. ( This contains only a small percentage of the overall number of product groupings involved in this range - All are contained in The Catalogue) Dilex EDP:  is a stainless steel movement profile  which allows horizontal movement through a tongue and groove connection Dilex KS is a movement profile with edge protection consisting of lateral anchoring legs made up of Aluminium or Stainless Steel which are connected to a replaceable movement zone made of soft rubber Dilex EKSB  is a movement profile with edge protection for floor coatings and other thin floor coverings. It consists of lateral stainless steel anchoring legs that are connected to a fixed elastic insert of soft synthetic material. Dilex BTO is a structural movement nd control joint made of aluminium for floor and wall transitions. The lateral joint connection of the sliding middle section of the profile is able to absorb 3 dimensional movement. Dilex KSA is a connection profile with edge protection. The profiles anchoring leg ,ade of aluminium or stainless steel are connected to a replaceable movement zone made of soft PVC. The profile is used for creating transitions between coverings and fixed structures such as window frames Dilex RF is a 2 part corner profile made of recycled rigid PVC and soft CPE for durable , flexible and maintenance free perimeter joints between walls and floors Dilex EHK is a stain;ess steel coved shaped profile for internal wall corners or for floor to wall transitions with high hygienic requirements Dilex EMP is a stainless steel movement profile for screeds. The tongue and groove connections accommodate horizontal movement  

Schluter Edge Profiles for Floor Coverings: Schluter is the world wide leader in Edge Profiles for floors. The full range including prices, colours, sizes and thicknesses  available can be seen in the catalogue that you may download below but here is a brief overview. Schiene:  A special Profile that finishes and protects the edges of tiles surfaces that can also be used with other material and applications. Schiene - ES a stainless steel finishing profile for ceramic tiles and natural stone covering. It features an integrated joint spacer that defines a joint chamber with the covering material Schiene Basic is a finishing profile for tile coverings with a right angled transition from the anchoring leg to the vertical leg and a right angle head design Schiene V is a finishing profile with a right angled transition from the anchoring leg to the finishing leg for wooden floors or other rigid floors such as Terrazzo. The evenly shaped finishing leg allows for grinding of the covering. Reno TK provides a smooth transition between tiles surfaces and lower neighbouring floor coverings. In addition the edges of the adjacent floor coverings are effectively protected by the transition leg. Reno V is a pofile with a variable transition leg for smoothly joining floor coverings of different heights. The integrated spacer creates a uniform grout joint. Reno U is a profile for the stepless transition between floor coverings of different heights. The integrated spacer creates a uniform grout joint. Reno Ramp is a profile that provides a gradient transition between tile coverings and lower adjoining surfaces in extra heavy duty applications. The integrated spacer creates a uniform grout joint, Reno T is retrofitted to adjoin different types of floor covering of the same height

Now available with NEW Schlüter-DITRA-HEAT-TB matting – up to 70% faster heat-up time. The complete patented system for under tile and stone heating for wall and floors, Schlüter®-DITRA-HEAT, has been updated to now include integrated thermal break, Schlüter-DITRA-HEAT-TB matting, which provides a thermal break, saving energy and makes installation easier, while providing faster-response time. Schlüter-DITRA-HEAT was designed so that the cables fit directly in the uncoupling mat that eradicates sticky situations, measuring mistakes, and the need for self-levelling and primers, ultimately saving time and money. The new Schlüter-DITRA-HEAT-TB mat uses the same system but also has a thermal break. This unique combination of fleece and matting allows an input of 136W/m2, to push up to 110W/m2 to the surface, therefore, the system costs less to run whilst producing significantly more heat per metre compared to other systems. Leaving other conventional systems out in the cold, Schlüter-DITRA-HEAT is the perfect all-in-one integrated solution for use under tiles and natural stone. Ideal for refurbishment and renovation projects thanks to its uncoupling and crack-bridging properties, Schlüter-DITRA-HEAT is unlike anything else available due to its loose heating cables which are fixed within the uncoupling mats unique studded design, therefore free of tape or glue. Offering optimum freedom for creating concentrated heating zones, as well as providing uniform spacing without the need for measuring and marking, the new system will dramatically cut installation time by up to 70%. Time-saving benefits include: • Easy press to lay cable – no tape or glue • No self-levelling layer or primer laying – time saved on application • CE Marked waterproofing simply by sealing the matting joints and connections • Loose heating cable – greater flexibility • Uniform spacing – no measurements • No need for insulation boards with Schlüter-DITRA-HEAT-TB matting • Integrated and balanced packages – all from one trusted manufacturer • Can be tiled immediately – no waiting time Schlüter-DITRA-HEAT makes the installation of under tile heating simpler and easier than ever before. Its low assembly height is also ideally suited for renovation projects and it’s even suitable for installation over problematic substrates. Ditra Heat and All Schluter Products are available from our Two Dublin Showrooms - Send an Enquiry or Call Us Today for Further details  

Schlüter ® -DITRA 25 is a polyethylene membrane with a grid structure of square cavities, each cut back in a dovetail configuration and an anchoring fleece laminated to its underside. Designed for tile and natural stone installations, Schlüter ® -DITRA 25 serves as a waterproofing membrane, a vapour pressure equalisation layer to accommodate moisture occurring at the underside of the substrate and an uncoupling layer for problematic substrates. The substrate must be even and load bearing. To bond Schlüter ® -DITRA 25, use a bonding adhesive that is appropriate for the substrate. Apply the adhesive using a 3 x 3 mm or 4 x 4 mm notched trowel. The anchoring fleece on the underside of Schlüter ® -DITRA 25 must be fully engaged in the adhesive to provide a mechanical bond to the substrate. Please observe the open time of the bonding adhesive. Using the thin-bed method and following all applicable industry standards, set the tile or stone covering directly on the Schlüter ® -DITRA 25 in such a way that the tile adhesive becomes mechanically anchored in the square, cut back cavities of the Schlüter ® -DITRA 25 matting. Schluter Ditra Matting is used for: Uncoupling Waterproofing Equalisation of Vapour Pressure Load Distribution ( Load Impact) Adhesive Properties Schluter Ditra Matting is available Ex Stock for Nationwide Delivery. Italian Tile and Stone Are Agents for The Complete range of Schluter products in Ireland. Call our Dublin showrooms today for more details